In the light-chip semi-finishing machining, the chip is faster and the chip is stable. It is used in low- and medium-speed occasions with poor rigidity; in the intermittent and rough machining, the safety and reliability of the cutting edge are improved; the chip breaking is smooth and the versatility is strong.
The cutting edge of the chip breaker increases the rake angle by 6 degrees to form a large arc and smooth transition design with the rake face, the chip is smooth, the cutting edge does not lose strength, and the versatility is very strong.
M-type materials are rough, semi-finished geometry, with double-sided chipbreaker,suitable for stainless steel, steel, cast iron, etc.; the materials have very light versatility. Good cutting edge strength, capable of processing in general impact situations
M-type material general geometry, double-sided chipbreaker, general geometry; for stainless steel, mild steel, and difficult-to-machine materials, there is a very versatile full-circle geometry; sharp cutting edge, light chipping, and capable of lower speeds Rough finishing
Stainless steel processing, better comprehensive performance of hole processing, strong versatility
General processing geometry, double-sided chipbreaker, especially suitable for processing K-type materials
Satisfy various processing needs such as cutting, grooving, turning, etc. The cutting process becomes brisk, chip removal is smoother, and the ideal surface quality is achieved.
the special Cut-off chip breaker design, the special chip breaker design narrows the chip and improves the cutting flow control
The special flank structure reduces the cutting resistance by 20%, reduces vibration, and further improves the surface quality; the special edge design makes the chip breaking effect better, and the tool can be moved horizontally.